ZipUP Underdeck Drainage & Ceiling System

Deck Drainage /
UnderDeck Ceiling System
 ZipUP Underdeck Drainage & Ceiling System 

View Manufacturer's ZipUp Video

View Contractor's ZipUp installation Video

Installation Instructions

Zip-UP UnderDeck� can be painted with a latex paint.  All parts are white or beige.  White ceiling panels have a serrated finish, beige ceiling panels have a sand pebbled finish.  Smooth panels available by special order.

 

ZipUp Orders ship in approximately 10 business days and are shipped via common carrier.

� Zip-UP UnderDeck� is the best way to finish off your under deck living space.
� Installation is simple with only a few common tools.
� Zip-UP UnderDeck� is a water tight water barrier that effectively channels water to a gutter system.
� This system provides a flat clean finish that is unparalleled by any other deck finishing system.
� No other system offers this much functionality at a low price of around $7.25/sq. ft.
 
ZipUp Parts
Wall Trim:  The "E" shaped trim that attaches around the entire periphery of your deck.
Main Rail:  The mounting pieces that run the length of your deck.  These rails support your Panels.
Ceiling Panel:  The panels are the ceiling surface that "Zip" into the Main Rails.  They are easily removed for cleaning or access to your deck framing.
Pitch Rail:  Rails used to impart a slope of 1/8" per foot in order to properly drain rainwater toward your gutter system.  (Ripping a treated 2x4 accomplishes the same thing for less cost.)
Seam Rail:  For decks with runs longer than 16'.

Need Help Planning Your ZipUp System?  Call 800-966-9261

ZipUp also makes an indoor ceiling system.  Call us for more info.


ZipUp Wall Trim

 

Mounts to the house and the 2 outside rim joists running perpendicular to the house.

12' Wall Trim - $23.33

Quantity  


ZipUp Main Rail

Mounting Rails that fit into the Wall Trim at the house, supports the Ceiling Panels and attach to the Pitch Rails.  You will need one less Main Rail than total number of Ceiling Panels.

8' Main Rail - $19.88 12' Main Rail - $29.80 16' Main Rail - $39.73

Quantity  

Quantity  

Quantity  

ZipUp Ceiling Panels

1st & Last Ceiling panel edge slips into Wall Trim on one side, and "Zips" into the Main Rail on the other side.  All others "Zip" into the Main Rails on each side.  To Calculate number needed, divide the width of your deck (in inches) by 12 1/8 (Center to Center of Main Rails) and round up.

8' Panel - $31.79 12' Panel - $47.68 16' Panel - $63.59

Quantity  

Quantity  

Quantity  

ZipUp Pitch Rails

 

Used to create slope for the panels from the house to the outer edge of the deck.  Use 1/2" for every 4'.  EXAMPLE:  If the deck runs 12' from the house to the outer edge, you would need 1/2" Pitch rail at 4', a 1" Pitch rail at 8' and a 1 1/2" Pitch rail (a 1" and a 1/2" combined) at 12'.  The Pitch rails run perpendicular to and attach to the bottoms of your joist.

12' x 1/2" Pitch Rail - $36.20

Quantity  
12' x 1" Pitch Rail - $47.72

Quantity  

ZipUp Seam Rails

Used when the run from the house to the outer edge of the deck is longer than 16'.  Allows for a 2nd run of Main Rails and Ceiling Panels.

12' Seam Rail - $29.60


Quantity