This bit is custom ground to the specific diameter of
.900 to allow a snug fit for our balusters, end caps,
recessed lights, DEK DOTs and the Apollo series post
lamps.
The drill jig is designed to fit over dimensional lumber
(2x) on end. Simply drill your first hole put the male
bushing into the hole that you just drilled and use the
opposite end drill bushing to drill your next hole.
Using the jig will give you 4-5/8" on center for
baluster installation and meets code for spacing. If
your material is thinner than 2x or larger just bend the
side ears in until you have a nice fit on the material
your drilling.
End Caps $2.50 ea
Our patented end caps give you a professional finished look. The
upscale feel that you won't find from any other manufacturer.
Stair Caps $3.50 ea
Our patented stair fitting allows you to drill straight on.
No more trying to drill at an angle and hoping that you are
correct.
Our fitting is designed for a standard code 35 degree stair
incline. However, we got really clever with the part geometry so
you can use it at inclines between 33-37 degrees.
Stair Caps